| Mounting Kit Options |
|
Mounting Kit |
Description |
PDF Link |
| Model
540 Mounting Kit Options. All mounting
kits consist of a PC card, 15-pin connector, and necessary pots. |
|
MK216 |
Accepts one unit plus 2 pots
(Set & Hys.) |
Model
540
Mounting Kits |
|
MK217-5 |
Accepts one unit plus 2 pots (Set & Hys.) and
Low-Profile 5V Relay |
|
MK217-15 |
Accepts one unit plus 2 pots (Set & Hys.) and
Low-Profile 15V Relay |
|
MK217-28 |
Accepts one unit plus 2 pots (Set & Hys.) and
Low-Profile 28V Relay |
|
MK218 |
Accepts two units plus 4 pots (2 Set & 2 Hys.)
|
|
MK218-5 |
Accepts two units plus 4 pots (2 Set & 2 Hys.)
and 5V Relay |
|
MK218-15 |
Accepts two units plus 4 pots (2 Set & 2 Hys.)
and 15V Relay |
|
MK218-28 |
Accepts two units plus 4 pots (2 Set & 2 Hys.)
and 28V Relay |
| Model
545 and 546 Mounting Kit Options. All
mounting kits consist of a PC card, 15-pin connector, and necessary pots. |
|
MK376 |
The three outputs are connected for current-sinking
operation. This model has provision for external remote adjustment of
set-points and external latch/unlatching operation. |
Model
545 and 546 Mounting Kits |
|
MK377 |
The three outputs are connected for current-sourcing
operation. This is the emitter-follower configuration. As with the MK376,
the set-points can be set remotely or on the mounting kit. Latching
and unlatching control is also brought out on the connector. |
|
MK378 |
This mounting kit has two low-profile relays mounted
on the PC board; one for the HI output and one for the LO output. The
outputs are connected for current-sinking mode of operation. |
|
MK379 |
Relays are provided for all three outputs; HI, GO,
and LO on this model. Each set of contacts is brought out to the connector. |